LEDSON Sarox9+ WHITE/ORANGE 120w

Description

Description
Ledson Sarox9+ has four strong LEDs as position light and allows you to choose between xenon white or yellow-orange, just like the rest of our auxiliary lights in the "+ series". Its contemporary design is a combination of elegant and progressive, while the auxiliary light interior impresses with quality components that make all the difference when you're driving on dark roads.

How about: 1 lux of brightness at 469 meters and 10200 real lumens, protection against harsh weather on our Nordic roads with IP68/IP69K rating, E markings (ECE R112/R10/R7), automatic pressure equalization, electronic heat management for Optimal LED performance and lifespan, aluminum heatsink, stainless steel bracket...

Combination Beam Pattern

The light has a combined light pattern, which means it spreads the light over a wide area close to the vehicle, but also focuses the light far away. This beam pattern is ideal if you want lots of light close to the vehicle for those smaller roads, but still have the length to illuminate the road ahead.

What else is needed?

DT Relay: We strongly recommend using our DT relay with original connection to connect the LED bar to the vehicle. You can then choose between controlling the bar with a button or turning it on with the main light (the bar automatically turns on and off when the main light is turned on and off, as most people prefer). There is also a fuse between the external light and the battery to prevent possible damage to the battery and other equipment. Detailed installation instructions are included with the DT relay.
Mounting on the vehicle: It can be mounted directly on the vehicle (drill in a suitable location) or in a slightly smoother and more stylish way using a license plate holder.
Stone chip protection and yellow snow filter can be found here

Specifications:

With position light, yellow-orange or xenon white (connect the desired color)
Combination Beam Pattern
ECE R112 E-marked (Ref. 45), R10/R7 (white position light)
Range: 938 m (0.25 lux), 469 m (1 lux)
EMC protected
12,000 lumen (gross), 10200 lumen (actual)
Cool white light (5700K)
TIR (total internal reflection)
ETM (Electronic Thermal Management)
Side reflective optical system
Pressure equalization membrane
Aluminum Heat Sink
Adjustable stainless steel stand
Lexan polycarbonate front cover
Polycarbonate Lens
24 month warranty

Technical Data:

120 W (4 x 20 W Cree LED + 4 x 10 W Cree LED)
IP68/IP69K (water and dustproof)
4-pin DT connector supplied
Voltage 9-36V
Main light load: 8.1 A at 12 V and 4.4 A at 24 V
Position light load: 0.9A

Dimensions and weight:

Width: 218mm
Height: 218 mm (233 mm incl stand)
Depth: 84 mm
Cable length: 42 cm
Weight: 1.8kg

Provided:

Ledson Sarox9 + LED light 9 "
Bracket, screws and screws to secure the auxiliary light with one or two fixing points
DT connector (4 poles)
Installation Instructions

Installation instructions for cables (detailed instructions included with the product):

Red: auxiliary light (+)
Black: auxiliary light / position light (- ground)
White: position light (+) white light
Yellow: position light (+) yellow-orange light
NOTE: The DT connector must not be cut as this increases the risk of moisture damage and the warranty will no longer apply.