SAROX 9 WHITE 120W

Description

Ledson Sarox9+ in ivory white color has four strong LEDs as position lights and allows you to choose between xenon white or yellow-orange, just like the rest of our "+ series" extra lights.
Sarox's contemporary design is a combination of style and progressivism, while the auxiliary light interior impresses with quality components that make all the difference when you go out and drive in the dark.

How about: 1 lux brightness at 469 meters and 10,200 real lumens, solid protection against harsh weather on our Nordic roads with IP69K rating, E markings (ECE R112/R10/R7), membrane for automatic pressure equalization, electronic pressure management heat for optimal LED performance and lifespan, aluminum heatsink, stainless steel Ledson bracket...

Sarox 9+ has a combined light pattern (combo)

A blended light image is a mix between high beam (distance) and spotlight (width). The auxiliary light has diodes that reflect light both forward and to the sides. This light pattern is ideal if you want lots of light close to the vehicle for smaller roads, but still have the length to illuminate the road ahead.

Characteristics:

With parking lights, yellow-orange or xenon white (turn on the desired color)
Combined light beam image (a mix between spot and flood)
ECE marking R112 (Ref. 45), R10/R7 (white position light) - Read more about E markings here
Range: 938 m (0.25 lux), 469 m (1 lux)
Protected against EMC (does not interfere with the radio)
12,000 lumens (theoretical), 10,200 lumens (actual)
Cool white light (5700K)
TIR (Total Inner Reflection) takes advantage of all the light and minimizes stray light
ETM (Electronic Thermal Management) - adjusts the strength of the diodes depending on how hot they are for optimal lifespan
Side reflective optical system
Pressure equalization membrane
Aluminum Cooling Flange
Adjustable stainless steel stand
Lexan Polycarbonate
Polycarbonate Lens
Delivered in pieces
36 month warranty

Technical Data:

120 W (4 x 20 W Cree LED + 4 x 10 W Cree LED)
IP69K (water/dust proof) - Read more about IP rating here
4-pin DT connector included
Voltage 9-36V
High beam charging: 8.1A at 12V and 4.4A at 24V
Position light load: 0.9A

Dimensions and weight:

Width: 218mm
Height: 218 mm (233 mm including stand)
Depth: 84 mm
Cable length: 42 cm
Weight: 1.8kg

Included:

One Ledson Sarox9+ 9" LED auxiliary light
Bracket, bolts and screws to secure the auxiliary light with one or two fixing points
DT connector (4-pin) complete with DT relay harness
Installation Instructions
DT Adapter

Installation instructions for cables (detailed installation instructions included):

Red: Extra light (+)
Black: Additional light/position light (- ground)
White: Position light (+) white light
Yellow: Position light (+) yellow-orange light
NOTE: The DT connector must not be cut as this means an increased risk of moisture damage and the warranty will no longer apply.