LEDSON 11G Xtreme lamp (6000K) for H7 truck
Description
11G Xtreme - our strongest LED headlights!
Specially designed for trucks (24V)
Complete kit! 5000/7000 lumens, smaller size, 3 year warranty
11G Xtreme
The better and further you look, the more reaction time you have and the safer driving will be for you and your fellow travelers. Plus, it's less tiring for you when you see curves and traffic signs a few seconds earlier and with better clarity! We are extremely dependent on the light from headlights, which means that once you experience the power of LED light, the same feeling comes in as when you switch from an older car to a newer one (you never want to go back).
Don't let the darkness prevail - drive with confidence with our 11G Xtreme! Double brightness compared to traditional halogen bulbs and with a full 3-year warranty. Strong and safe for the car and you!
Customer reviews
"I've always prescribed xenon, but this Xtreme 11g is incredibly good, won't go back to xenon. Clearly approved compared to the original "Matrix" Led." Rating 5/5
"The difference in the immediate area is huge compared to standard halogen bulbs. It should be clear that these bulbs do not replace the auxiliary light, but if the car has a good high beam image with a halogen bulb, that bulb will be a clear lift .the result!” Rating 5/5
"I always had xenon as an option for high beams. After I bought this LED light, I will never use xenon again. I recommend this light!" Rating 5/5
Frequently asked questions and answers
Is it possible to replace common light bulbs with these?
Answer: Yes, that's the point! If there is no Xenon or LED in the car lights you want to replace, it will work fine! The idea is to switch from standard halogen bulbs to the more superior LEDs and get all their benefits. For some car models, brackets may be required for the lamps to be securely fixed, but they belong to the exceptions. Read more about our lamp holders at the bottom of the page.
Will 11G lights fit in my car?
Answer: This is one of the most common questions we receive. The answer we give is that if there is no xenon or LED in the bulbs you want to replace, the only way to find out is to simply buy and try. Open purchasing for 30 days allows you to return the lights safely, no questions asked and get your money back! For some car models, brackets may be required for the lamps to be securely fixed, but they belong to the exceptions. Read more about our lamp holders at the bottom of the page.
Do I need a canbus system for it to work?
Answer: No, these bulbs work on both cars with canbus and cars without canbus. If you don't have a canbus in your car, it's better because it won't be able to alert you about a broken bulb. If you have a canbus bulb warning system, these bulbs have internal resistors that prevent these warnings (which is because LEDs consume less power than halogen and therefore the car thinks a bulb is broken when switching to LED) .
Are they difficult to assemble?
Answer: No, it's Plug & Play and very simple!
Remove your old halogen bulbs
Remove the bulb holder from the LED bulb and attach it to the headlight
Then go past the LED headlight and turn until the arrow on the bulb "meets" the arrow on the bulb holder
Connect the lamp to the driver/ballast and hide the driver, eg. the lamp housing behind the lamp
Then connect the unit to the car's normal connector
Now enjoy your new LED headlights - installation is complete!
How does the slide show?
Answer: The bright image should obviously be like a normal bright image, but enhanced. Sometimes you can turn the lamp on slightly to adjust the light image after assembly. It is advisable to do this against a wall, so that you can clearly see "what happens" to the blade when you turn the lamp until you find the desired blade.
What is the driver/ballast size? Will it fit in the lamp compartment?
Answer: The unit is smaller than a xenon ballast and therefore can usually be placed inside the lamp housing behind the lamp without wiring required. Length 59 mm, width 39 mm and height 20 mm.
Are they approved?
Answer: No, the bulbs are not marked E and therefore we can only recommend them for high beam and off-road vehicles.
What type of socket/bulb do I have in my car?
Answer: There are different ways to find out:
Our Lamp Guide can provide answers with a certain amount of reservation, so it does not need to be 100% accurate, but should only be viewed as a thumbs up
The car manual usually indicates the pedestal for medium and low beam
You can also remove one of the spotlight bulbs, it usually says the type of bulb the
Procurar detalhes