GLOWSTRIP 12/24V 5METRO

Description

Watch! To power the glow strip, a driver is required which you can order here: article LEDSON0081

It can be connected, for example, to the car battery (for 24 V only). One driver per brightness range, more brightness ranges are desired on the same driver - extend with a 2-way or 4-way connection. The recommended total length of glowstrip per driver is, in our opinion, 5 meters, so that the glow is not too weak (see more information at the bottom).

Wire dimensions:
Wire length to Glowstrip: 50 cm
Power cable length (plus/minus): 50 cm

Driver dimensions:
Length: 39 mm (including holes for possible driver attachment)
Width: 18mm
Height: 22mm

Maximum recommended length per driver
With a 2-way and 4-way coupling, you can get over 5 meters of Glowstrip in total on one Driver. However, we recommend that you activate a maximum of 5 meters of Glowstrip in total per driver. It's technically possible to have longer ranges, but the glare becomes worse the longer the range you have. If you want more than 5 meters, our recommendation is to increase with more drivers. Consumption per brightness band is always the same, regardless of length: 0.1A.

NOTE: When the driver receives power, it emits a faint, high-frequency sound. This is completely normal and nothing that affects its function and nothing that can be done about it.